QD-F Flat-bottom

  •    Replaceable drill tip, QD-F, Flat bottom
  •    Point Angle: 140°
  •    Available in Diameter Range of 8-26 mm with 1.5xD, 3xD, 5xD, 8xD and 12xD drill bodies
  •    Excellent surface finish and desired hole accuracy can be achieved
  •    Available in micro-grain carbide grade, PVD-TiAlN-coating
  •    Work on steel and cast iron

Indexable Deep Hole Drills

Designation

DIM.
(mm)

Drill body

Designation

DIM.
(mm)

Drill body

D

t

D

t

QD-080-F

8.0

4.0

QD080/089-12-D

QD-170-F

17.0

6.6

QD170/179-20-D

QD-085-F

8.5

4.0

QD-175-F

17.5

6.6

QD-090-F

9.0

4.2

QD090/099-12-D

QD-180-F

18.0

6.9

QD180/189-25-D

QD-095-F

9.5

4.2

QD-185-F

18.5

6.9

QD-100-F

10.0

4.4

QD100/109-16-D

QD-190-F

19.0

7.2

QD190/199-25-D

QD-105-F

10.5

4.4

QD-195-F

19.5

7.2

QD-110-F

11.0

4.5

QD110/119-16-D

QD-200-F

20.0

8.2

QD200/209-25-D

QD-115-F

11.5

4.5

QD-205-F

20.5

8.2

QD-120-F

12.0

4.8

QD120/129-16-D

QD-210-F

21.0

8.6

QD210/219-25-D

QD-125-F

12.5

4.8

QD-215-F

21.5

8.6

QD-130-F

13.0

5.1

QD130/139-16-D

QD-220-F

22.0

8.9

QD220/229-25-D

QD-135-F

13.5

5.1

QD-225-F

22.5

8.9

QD-140-F

14.0

5.5

QD140/149-16-D

QD-230-F

23.0

9.3

QD230/239-32-D

QD-145-F

14.5

5.5

QD-235-F

23.5

9.3

QD-150-F

15.0

5.9

QD150/159-20-D

QD-240-F

24.0

9.7

QD240/249-32-D

QD-155-F

15.5

5.9

QD-245-F

24.5

9.7

QD-160-F

16.0

6.3

QD160/169-20-D

QD-250-F

25.0

10.1

QD250/260-32-D

QD-165-F

16.5

6.3

QD-255-F

25.5

10.1

       

QD-260-F

26.0

10.1

 

返回上页

logo | 主页 | 设备仪器 | 在线留言 | 关于我们 | 联系我们 | ©2011-2022 SMT 蜀ICP备17034015号-2 | 702043 Visitor | English